Configuration

Choose your Electro Kabuki system configuration

Specifying an Electro Kabuki system is straightforward. Order enough EK Modules to space at intervals of one to two metres along your drape and enough cables to link them together. And be sure to select modules of the right voltage. Work out the distance from your control location to the first EK module, and order a cable that’s long enough.

If you need a simple manual kabuki drop, at the push of a button, choose a Basic Firing Box. But if you expect to perform an automated kabuki drop using DMX technology, you can specify the DMX/Sensing Firing Box; you’ll need an end-of-line unit to work with it.

Other EK components are readily available to let you set up more complex curtain drops and kabuki reveals: see the configuration examples below.

  • A
    EK MODULE

    Supports the drape or item and releases it when signalled.110v or 230v AC.

  • B
    CLAMP

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • J
    FIRING BOX - BASIC

    Controls the system - testing/firing circuit 1&2 EK modules.

  • K
    POWER CABLE

    Connects the customer's power supply to the firing box.

  • E
    LINK CABLE

    Connects one system item to another. Each end is fitted with a colour-coded connector.

  • A
    EK MODULE

    Supports the drape or item and releases it when signalled.110v or 230v AC.

  • B
    CLAMP

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • I
    FIRING BOX - DMX

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • F
    END-OF-LINE INDICATOR

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • K
    POWER CABLE

    Connects the customer's power supply to the firing box.

  • E
    LINK CABLE

    Connects one system item to another. Each end is fitted with a colour-coded connector.

  • A
    EK MODULE

    Supports the drape or item and releases it when signalled.110v or 230v AC.

  • B
    CLAMP

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • I
    FIRING BOX - DMX

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • F
    END-OF-LINE INDICATOR

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • K
    POWER CABLE

    Connects the customer's power supply to the firing box.

  • E
    LINK CABLE

    Connects one system item to another. Each end is fitted with a colour-coded connector.

  • G
    SPLITTER BOX

    Divides the supply cable into 2 or 3 strings.

  • A
    EK MODULE

    Supports the drape or item and releases it when signalled.110v or 230v AC.

  • B
    CLAMP

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • D
    SAFETY BOND

    Prevents the EK module from falling in the case of a clamp or bolt failure.

  • C
    BACK-TO-BACK BRACKER

    Supports 2 EK modules on 1 clamp – for Flop and Drop releases.

  • I
    FIRING BOX - DMX

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • F
    END-OF-LINE INDICATOR

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • K
    POWER CABLE

    Connects the customer's power supply to the firing box.

  • E
    LINK CABLE

    Connects one system item to another. Each end is fitted with a colour-coded connector.

  • A
    EK MODULE

    Supports the drape or item and releases it when signalled.110v or 230v AC.

  • B
    CLAMP

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • I
    FIRING BOX - DMX

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • F
    END-OF-LINE INDICATOR

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • K
    POWER CABLE

    Connects the customer's power supply to the firing box.

  • E
    LINK CABLE

    Connects one system item to another. Each end is fitted with a colour-coded connector.

  • A
    EK MODULE

    Supports the drape or item and releases it when signalled.110v or 230v AC.

  • B
    CLAMP

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • I
    FIRING BOX - DMX

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • G
    SPLITTER BOX

    Divides the supply cable into 2 or 3 strings.

  • K
    POWER CABLE

    Connects the customer's power supply to the firing box.

  • E
    LINK CABLE

    Connects one system item to another. Each end is fitted with a colour-coded connector.

  • A
    EK MODULE

    Supports the drape or item and releases it when signalled.110v or 230v AC.

  • B
    CLAMP

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • I
    FIRING BOX - DMX

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • F
    END-OF-LINE INDICATOR

    Supports the drape or item and releases it when signalled. 110v or 230v AC.

  • K
    POWER CABLE

    Connects the customer's power supply to the firing box.

  • E
    LINK CABLE

    Connects one system item to another. Each end is fitted with a colour-coded connector.

Download the Electro Kabuki User Manual

Scroll to top